Service Manual
8-5-82. 29-931: MCS Cannot Communicate with DENSITOMETER
LOCAL PANEL Message
Internal Communications
Failure: Densitometer-- Alarm
sounds
Summary
This error occurs if the MCS tries to communicate with the DENSITOMETER MICRO, but receives no
response after 5 attempts.
Result of Error
The IMAGER is unable to print film. It can accept and queue new jobs, but it will not initiate new films. All
films in the IMAGER will be reprinted. The error can be cleared only by restarting the IMAGER.
User Action
1. Restart the IMAGER.
2. If the error persists, call Service.
FE Action
1. Perform the DENSITOMETER reference level adjustment, paragraph 3-5.
8-100
Log Message
MCS failed to communicate with
Densitometer after 5 attempts
DICOM Message
Severity
ELEC DOWN
0--Fatal
7F3318
2005 July Rev. B