3. After reassembly, use ISOPROPYL ALCOHOL and a CLEANING PAD to clean the surfaces of the
RAILS and the FLYWHEEL.
4. After reassembly, do the following adjustments:
Optics Translation Speed and SOP Delay Adjustment (paragraph 3-4).
•
Laser Dynamic Range Adjustment (paragraph 3-6).
•
2005 July Rev. B 7F3318
Figure 4-41. Removing the SCANNER ASSEMBLY
Section 4 - - Disassembly/Reassembly
Group WIRES and
tie- -wrap to POST
8100- - 103C (Mod)
4-47