Film Pickup Problems In Area 1 - Kodak DryView 8150 User Manual

Troubleshooting

Film Pickup Problems in Area 1

Area 1
3-10
3. Clear any films that may be jammed in the film cartridge area.
4. Turn the rollback knob counterclockwise to close the cartridge.
Area 1 is the location where film is removed from the film cartridge and
positioned to be sent by drive rollers toward the exposure area. If the
Imager cannot properly pick up a sheet of film and position it for drive,
error 21-116 (Pickup Fail) is declared. Error 21-177 (Cartridge Failed to
Close) also relates to Area 1.
NOTE: When problems occur in Area 1, the film cartridge is left open.
When you open the front door, the top sheets of film in the
cartridge will be exposed. Before opening the door, make the
room as dark as possible to minimize exposure.
Film Area 1
1. Press Door Open on the Error Message screen.
2. Remove any film outside the cartridge.
3. Turn the rollback knob counterclockwise to manually close the
cartridge lid.
4. Close the front door.
5. If you cannot resolve the problem, call for service. (See
7F3319
Rollback
Knob
H200 0005d
page 3-17.)
October 4, 2004