Error 21-116, 22-116, Or 23-116: Film Pickup Failure - Kodak DryView 6800 Diagnostics Manual

DIAGNOSTICS
30JUL07

Error 21-116, 22-116, or 23-116: Film Pickup Failure

8F2919
Page
123 of 326
Messages
Film Jam in Area 1: xxxxx
Supply
(Alarm sounds)
Description
Note
UPPER DRAWER (U) = 21. MIDDLE DRAWER (M) = 22. LOWER DRAWER (L) = 23.
This error occurs if after 3 attempts, the IMAGER cannot lift a sheet of film and place it into
the feed position, indicated when leading edge is detected by the PICKUP FILM AT FEED
SENSOR (S5x). All other steps of the pickup sequence must complete successfully for this
error to occur. The error is cleared when the SUPPLY DRAWER is closed, as indicated by
the SUPPLY DRAWER INTERLOCK.
Result of Error
The system cannot make a print from the SUPPLY DRAWER. The SPOOLER is able to
receive and queue jobs, and print from any other available SUPPLY DRAWER.
User Action
1 Open the DRAWER.
2 Close the CARTRIDGE to prevent film fog.
3 Remove any loose films.
4 Close the DRAWER.
LOCAL PANEL LOG
xxxxx Supply: Film Pickup
Failure. Film at Feed (S5)
sensor failed to detect film
leading edge
Status Messages and Error Codes
DICOM SEVERITY
FILM JAM 1-Alert