Paper Feed Drive Gear Train; Removing The Paper-Feed Drive Gear Train - Tektronix PHASER 780 Service Quick Reference Manual

Paper feed drive gear train

1. Remove the high voltage poser supply as described in "High voltage
power supply" on page 132.
2. Slide the paper feeder out of the printer.
3.
Remove the screw securing the wire clip to the paper-feed drive gear
train. Move the clip and harness out of the way.
4. Remove the five screws securing the paper-feed drive gear train to the
printer frame. Remove the gear train.
5.
Remove the two wire clamps from the paper-feed drive gear train.
Reverse these steps to install the paper-feed drive gear train.
Wire clamps

Removing the paper-feed drive gear train

92
Phaser 780 Color Printer
Wire clip
Paper feed drive gear train
780-5-73