Upper rear
cover
Lower rear
cover
Figure 8-1 Removing cabinet covers
EMI shields
EMI shielding on the printer may change as the printer is refined.
Initial printers feature many metal plates and shields. Later models may have
fewer or no shields. Use a magnetic screwdriver when removing the many
screws securing EMI shields in place to avoid losing the screws in the printer.
Note the placement of the shields and the routing of all cables prior to removing
them.
FRU Disassembly/Assembly
Top cover
Left door
Service Manual
8
Left side
cover
Manual feed
tray
9013-27
8-3