4.
Once selected, press Ctrl-R to start the test(s). Depending on the test,
a screen may be displayed to modify how the tests run.
Figure 6-8 Running a test
The solenoid test, shown above, allows you to selectively actuate a printer
solenoid as well as the drum fan. After the test runs, a summary of the test
results is displayed.
Caution
If you actuate the head tilt solenoid, you must re-engage the head
tilt cam gear to the head tilt solenoid. The printer is damaged upon
power-up if the solenoid is not re-engaged to the head tilt cam gear.
Troubleshooting
Service Manual
6-35
6