Table of Contents
Advertisement
•
The routing table should route 911 to a public line or line
pool.
•
If attendant notification is required, the routing table must
be set up for all 911 calls to use a dedicated line which has
an appearance on the attendant console.
Note: The actual digit string 911 is not hard-coded into the
system. More than one emergency number can be
supported
MCID (Profile 2)
The MCID feature allows you to use
call information recorded on the central office database for an
incoming call on a specific line (EUROISDN lines, only).
The user must invoke the feature code during the active call or
within 30 seconds (time varies on different networks) after the
caller hangs up. The user must remain on the line to enter the
code.
Network Call Diversion (Profile 2)
This feature is a network function of ETSI E1 lines that allows
forwarding and redirection of calls outside the Norstar
network when using an ETSI ISDN line. Functionality is
similar to that of External Call Forward (ECF). NCD redirects
calls using the same line on which they arrive. Call forward is
efficient since there is no need for additional outside lines.
DTI card configured as a PRI card
The DTI card on your Norstar system can be configured to
support PRI. For information on configuring a DTI card as a
PRI type card, see Provisioning the DTI card for PRI on page
456.
P0992638 03
Welcome to ISDN / 47
² ¡ á à
Modular ICS 6.0 Installer Guide
to have
Advertisement
Table of Contents
Troubleshooting
