Name; Restrictions - Nortel Modular ICS 6.0 Installer's Manual

4. Press ' until the display shows Lines.
5. Press '. The display shows Linexxx:Line XXX.
6. Press FIND and enter the line to which you want to define
a ring pattern.
7. Press ≠ until the display shows TrunkType:PRI.
8. Press ' until the display shows Dstnct ring:
NONE.
9. Press CHANGE to toggle to the ring pattern number you
want to assign to the line (None, 2, 3, 4).
¨
10. Press

Name

The default name for a line is Line XXX, XXX being the
three-digit line identifier. For example, Line 001.
This can be changed to any combination of letters and numbers
to a maximum length of seven characters.
For more information, refer to Modular ICS 6.0 System
Coordinator Guide.

Restrictions

Use Restrictions to prevent a user from using a line for making
certain kinds of calls. For example, users should not be able to
make long-distance calls on lines used exclusively for local
calling.
P0992638 03
to exit or ' to continue programming.
Lines / 349
Modular ICS 6.0 Installer Guide