Shorting Straps On A Bri-St Card - Nortel Modular ICS 6.0 Installer's Manual

Shorting straps on a BRI-ST card

Ensure that the shorting straps are installed on both the receive
and transmit jumpers for the loop. Refer to the illustration
above.
The jumpers are numbered top to bottom, but the loops
associated with each pair of jumpers does not follow the same
top-to-bottom sequence. Refer to the table on the next page.
P0992638 03
Inserting a cartridge / 223
termination
installed
termination
removed
no shorting
strap
Modular ICS 6.0 Installer Guide