Remote Pkg - Nortel Modular ICS 6.0 Installer's Manual

384 / Passwords

Remote pkg

Remote pkg allows you to assign a specific remote access
package to a COS password.
The remote access package associated with the COS password
replaces any normally applicable remote access package.
Use CHANGE and the dialpad to program the two-digit remote
package.
The default setting (None), means that any
normally_applicable remote access package still applies.
Call log pswds
This setting allows you to override any Call log password
programmed with the Call log feature, and resets it to None.
This feature is used when someone forgets a password.
1. Press ≠ and enter the DN of the telephone.
2. Press ≠ and then CLR to clear the programmed
password.
Tips -
log Password feature. Refer to the Telephone Feature Card or
the Modular ICS 6.0 System Coordinator Guide for more
information.
Modular ICS 6.0 Installer Guide
You program a Call log password using the Call
P0992638 03