Drt To Prime; Drt Delay; Held Reminder - Nortel Modular ICS 6.0 Installer's Manual

400 / System prgrming

DRT to prime

Delayed Ring Transfer automatically forwards unanswered
external calls to a prime telephone, after a certain period of
time. This helps ensure that no external call goes unanswered.
Press CHANGE to select the setting: Y (Yes) or N (No).
Tips -
before this feature can operate. A prime telephone is assigned
to one or more external lines in the
programming.

DRT delay

Delayed Ring Transfer delay allows you to specify the number
of rings before a call is transferred to a prime telephone. For
this feature to work, DRT to prime must be set to yes.
Press CHANGE to select the setting: 1, 2, 3, 4, 6, or 10 rings.
Tips -
activated.
You can estimate the delay in seconds if you multiply the
number of rings by six.

Held reminder

When active, Held Line Reminder reminds you that a call at
your telephone is still on hold. You periodically hear two tones
from your telephone until you return to the call on hold.
Press CHANGE to select the setting: N (No) or Y (Yes).
Modular ICS 6.0 Installer Guide
An operational prime telephone must be assigned
The DRT delay can be programmed only if DRT is
Line Data
of
P0992638 03