Allowing Ncd; Feature Description - Nortel Modular ICS 6.0 Installer's Manual

166 / ETSI MCDN and network features

Allowing NCD

To use NCD, you must turn the feature on in Network
Services.
1. Press ' until the display reads System
prgrming.
2. Press ≠. The display shows Hunt groups.
3. Press ' until the display shows Network
Services.
4. Press ≠. The display shows Netwrk
Redirection: N.
5. Press CHANGE and set to yes.

Feature description

NCD is available only over ETSI ISDN lines. It can be
invoked when calls are presented to Norstar/BST extensions
over ISDN lines. The user must program the selected
extension. Refer to External call forwarding on page 44
NCD is integrated with the following existing Norstar Call
Forward features:
• Call Forward Unconditional (CFU)—implemented on
Norstar Call Forward All Calls (CFAC)
Selective Line Redirection (SLR)
referred to as Line Redirection. This is programmable by
the user.
• Call Forward on Busy (CFB)—implemented on Norstar
Call Forward Busy.
• Call Forward on No Response (CFNR)—implemented on
Norstar Call Forward No Answer.
Modular ICS 6.0 Installer Guide
² Ý
, and
² ¡ Ý
, also
P0992638 03