Dialout; Use Pool - Nortel Modular ICS 6.0 Installer's Manual

364 / Services

DialOut

DialOut is the number you want the route to use.
Press ≠ and enter the DialOut digits (up to 24), or
press CLR to choose No numbr.
You can press
dialing string, if necessary.
Route 000 has no DialOut by default and cannot be changed.
² à Ú
² à ¡
² ¥ ¡ á
² ¥ á
² ¡ â Ý
See the Modular ICS 6.0 System Coordinator Guide for more information.

Use Pool

Press ' and CHANGE to select a line pool to be used
with the route: Pool A, Pool B...Pool O or PRI-A, PRI-B,
PRI-C, or PRI-D.
Route 000 uses Pool A by default and cannot be changed.
Modular ICS 6.0 Installer Guide
² à ¡
to insert a 1.5-second pause in the
Link – if your Norstar system is connected to a private
branch exchange (PBX), you can use a Link signal to
access special features.
Pause – Enters a 1.5 second delay in a dialing
sequence on an external line.
Programmed Release – performs same function as
¨
in a programmed dialing sequence. When the
system encounters Programmed Release in a dialing
sequence, it stops dialing and hangs up the call.
Run/Stop – inserts a break point into a sequence of
dialed numbers or characters used for automatic
dialing.
Wait for Dial Tone – causes a sequence of numbers
to pause until dial tone is present on the line before
continuing to dial.
P0992638 03