Max Transits; Modules - Nortel Modular ICS 6.0 Installer's Manual

Max transits

If you allow ISDN Call Connection Limitation (ICCL) on your
MCDN PRI system, you need to determine a threshold at
which the system will release the call, rather than allow
continued line tie ups. This threshold is called Max(imum)
transits. The default value for this feature is 31.

Modules

The Mod setting allows you to specify the type of module you
wish to configure.
Tip -
Other MICS configurations have up to 8.
Press CHANGE to select the setting: StnMod, ASM, TrunkMod or
DataMod.
Note: ASM is the same as AEM, which is the analog station
module.
P0992638 03
MICS-XC can have up to 14 modules.
Hardware / 465
Installer password required
Modular ICS 6.0 Installer Guide