396 / System prgrming
Programming the overflow set
This setting allows you to program the overflow set the hunt
group calls will be routed to when the queue is full.
•
If the overflow set is not a hunt group set, the call ceases to
be a hunt group call.
•
If the overflow set is a hunt group set, the call is treated as
a new call and goes to the bottom of the queue.
The overflow set also can be a set number associated with a
voice mailbox.
1. When the display shows Member DNs:.
2. Press ' until the display shows Overflow:.
3. Press CHANGE to change the overflow position.
4. Enter the new overflow position.
Setting the function name
This setting allows you to program the hunt group function
name, such as Service or Sales. The name can be up to seven
characters in length.
1. When the display shows Member DNs:.
2. Press ' until the display shows Name:.
3. Press CHANGE.
4. Use the dialpad to enter the name of the hunt group.
5. Press ' to store the name.
Modular ICS 6.0 Installer Guide
P0992638 03