Clid Match - Nortel Modular ICS 6.0 Installer's Manual

On Extended all call types will ring except priority calls and
voice calls.
Phantom DNs
A Phantom DN is the term used to describe a situation where
a line is programmed to appear and ring on a set that does not
physically exist. It allows you to create an Answer Key for the
set that does not exist on an existing set. You would use a
phantom DN in the case where you have taken a line out of
service, such as a customer-response line, but you still get calls
to that number. To handle the calls, create an answer key using
the phantom DN on the set where you want these calls to be
taken.

Clid match

This setting determines the minimum number of digits that an
external call must match to an existing system speed dial
number in order for the system to offer a name display for the
CLID prompt if the system speed dial number is set up to
display the caller name. Refer to the Module Plus System
Administrator Guide for information about setting up System
Speed Dials.
1. Under Featr settings, press ≠. The display
shows Backgrnd music:.
2. Press ≠. The display shows Backgrnd music: N.
3. Press ' until the display shows CLID match: 8.
4. Press CHANGE to select the a number from 3 to 8, or select
None, if you do not require any number matching.
¨
5. Press
P0992638 03
to exit or ' to continue programming.
System prgrming / 409
Modular ICS 6.0 Installer Guide