Public Networks - Nortel Modular ICS 6.0 Installer's Manual

5. Press CHANGE and use the dialpad to enter a location code.
Note: This code must be unique to your system.
6. Press '. Priv DN len:3 displays.
7. Press CHANGE to choose a new private DN length. (3-14)
Note: The Private DN length must match the DN lengths
being used by the other systems in the network. This is
what enbloc dialing uses to determine when the
complete number has been dialed.

Public networks

When you identify public DNs on a network, use the Dialing
Rules to define any prefixes that need to be dialed out. The
public network refers to connections to the public switching
network (PSTN).
1. At Public Network, press ≠.
Pub DN lengths displays.
2. Press '. PrivNetID:1 displays.
3. Press ≠. Show prfix: displays.
4. Press ADD and enter a prefix.
5. Press OK to accept the prefix.
6. Repeat steps 4 and 5 until all the prefixes have been added.
Tip -
display, press
To remove a prefix, find the prefix, then press
P0992638 03
If you want to view the prefix list, at the Show Prfix:
'
System prgrming / 415
.
Modular ICS 6.0 Installer Guide
REMOVE
.