Programming The Analog Vertical Service Code (Vsc); Programming The Bri Vsc - Nortel Modular ICS 6.0 Installer's Manual

Programming the analog vertical service code (VSC)

1. Press ≠. Analog VSC displays.
2. Press ≠. Tone:None displays.
3. Press CHANGE to enter a new tone dialing Name and
Number blocking VSC.
The VSC for tone trunks can include a maximum of
10 digits consisting of the CO Pause (
digits 0-9, *, and #.
4. Press '. Pulse:None displays.
5. Press CHANGE to enter a new pulse dialing Name and
Number blocking VSC.
The VSC for pulse trunks can include a maximum of
10 digits consisting of the digits 0-9. Pulse trunks do not
support
(two consecutive ones).

Programming the BRI VSC

1. Press ≠ until BRI USC displays.
2. Press ≠. Code:None displays.
3. Press CHANGE and enter a new BRI name and number
blocking VSC. This entry can be up to 10 digits, consisting
of CO Pause (
P0992638 03
² à ¡
, * or #. The * is represented by 11
² à ¡
² à ¡
) , digits 0-9, *, or #.
Telco features / 449
) , and
Modular ICS 6.0 Installer Guide