Nortel Modular ICS 6.0 Installer's Manual page 404

404 / System prgrming
The Invoke by Hold setting determines if a SWCA call put on
Hold can be picked up from other extensions in the group.
• If you want the call to be available to be picked up by other
members of the groups when you put a call on Hold, set
Invoke by Hold: to Y. A flashing indicator appears beside
the SWCA key when the call assigned to that key is put on
Hold.
• If you want calls to remain on Hold only at the telephone
where the call is received, set Invoke by Hold: to N. Even
if you set this field to N, users can still put selected calls on
SWCA hold, by pressing a free SWCA key to put the call
on Hold.
Refer to the System Coordinator Guide sections for
information about assigning key programming and for
instructions about using the keys.
1. Under Featr settings, press ≠. The display
shows Backgrnd music:.
2. Press ' until the display shows SWCA Cntrl:.
3. Press ≠. The display shows Auto Associate: N.
4. Press CHANGE to choose the Y or N option.
5. Press '. The display shows Invoke by Hold: N.
6. Press CHANGE to choose the Y or N option.
¨
7. Press
Tips -
you have park turned on for your system by specifying a Park
prefix (Access codes), and a park timeout setting (System
programming, Featr settings).
Modular ICS 6.0 Installer Guide
to exit or ' to continue programming.
Since SWCA keys use the park feature, ensure that
P0992638 03