Table of Contents
Advertisement
170 / ETSI MCDN and network features
Malicious caller identification (MCID)
The MCID feature allows you to use
call information recorded on the central office system for an
incoming call on a specific line (EUROISDN lines, only).
The user must invoke the feature code without hanging up, and
within 30 seconds (time varies on different networks) after the
caller hangs up.
Note: This feature must be allowed in network programming
to work. Check with your system administrator.
The following information registers on the network:
•
called party number
•
calling party number
•
local time and date of the invocation in the network serving
the called user
•
service provider option: calling party subaddress, if
provided by calling user)
Programming MCID capability
To allow MCID functionality on your system, you must turn
the feature on in Network Services.
1. Press ' until the display reads System
prgrming.
2. Press ≠. The display shows Hunt groups.
3. Press ' until the display shows Network
Services.
4. Press ≠. The display shows ETSI.
Modular ICS 6.0 Installer Guide
² ¡ á à
to have
P0992638 03
Advertisement
Table of Contents
Troubleshooting
