Network Dns; Call Type - Nortel Modular ICS 6.0 Installer's Manual

Network DNs

1. Press ≠ to display the DNs which are used with
the SPID.
2. Press ADD and enter the appropriate number to assign
additional Network DNs to the SPID.
The Modular ICS can have a maximum of 128 Network DNs
for the system. There is no limit to the number of Network
DNs for each SPID, but you cannot exceed the limit of 128
Network DNs for the system.
If the Network DN you try to enter is already assigned to a
SPID with a call type of Both, you will not be able to assign
the DN again.
If the Network DN you enter is already assigned to a SPID and
the call type is Voice or Data, it will be automatically
programmed with the unused call type. For example, if the DN
has Call type set to Voice in the previous SPID assignment, it
will be automatically set to handle Data calls when the same
DN is added to the other SPID.

Call type

Press CHANGE to select the call type of the Network DN:
Voice, Data, or Both.
CHANGE will not appear if the Network DN is already in use by
the system and the call type will be automatically programmed
with the unused call type. For example, if the DN has Call type
set to Voice in a previous SPID assignment, it will be
automatically set to handle Data calls when the DN is entered
the second time.
P0992638 03
Hardware / 473
Installer password required
Installer password required
Modular ICS 6.0 Installer Guide