Private Networks - Nortel Modular ICS 6.0 Installer's Manual

determine when a complete number has been dialed. The
PSTN DN Length Table is used by the PRI trunk to determine
when a complete PSTN DN has been dialed. Entries in the DN
Length table consist of two fields: Prefix and DN Length.
TIP -
using the coordinated dialing plan, as the system identifier is
part of the set DN.
Defining dialing plans:
At System prgrming/Dialing plan:
1. Press ≠. Private Network:None displays.
2. If you are defining a dialing table for a private network,
press ≠. Refer to Private networks on page 413.
If you are defining a dialing table for external (public) DNs
for a network, press '. Refer to "Public
networks" on page 415.

Private networks

Private network: None
Choosing this setting turns off MICS functionality.
1. At Type:None, press '.
Priv DN len:4 displays.
2. Press CHANGE to choose a new private DN length. (3-14)
P0992638 03
You do not need to use a Private DN Length if you are
System prgrming / 413
Modular ICS 6.0 Installer Guide