Extl Vmsg Set; 1Stdisplay - Nortel Modular ICS 6.0 Installer's Manual

Nortel modular ics 6.0 digital system package

Hide thumbs Also See for Modular ICS 6.0:

Table of Contents

information for calls on an external line, it must also be

programmed to appear and ring or ring for that line.

For systems that subscribe to Call Display services, Caller ID

can be viewed on any telephone by entering the Call

Information feature code

Feature Card or Modular ICS 6.0 System Coordinator Guide

for more information.

Call information does not automatically appear when the

telephone has an Answer DN, or belongs to a Ring group

activated by Ringing Service. Call information is still available

for these calls by pressing

Extl VMsg set

If you subscribe to a voice message service, you can access

that service through your Norstar system. The external voice

message setting controls where the indicator shows up when

there is a voice message waiting on a particular line. The line

must be assigned to appear on that telephone.

Press CHANGE to select the setting: N (No) or Y (Yes).

To find out if your voice message service will work with

Norstar, or if you have any problems with your service, contact

your voice message service provider.

Depending on the services you subscribe to, Call Display

information may contain the number of the caller, the name of

the line in your Norstar system that the call is on, or both. For

each telephone, you can determine which information is

displayed first.

In order for a telephone to display the Call Display

Terminals&Sets / 331

. See the Telephone

Modular ICS 6.0 Installer Guide