Nortel Modular ICS 6.0 Installer's Manual page 153

6. Press '. The prompt displays Tel #:.
7. Enter the number to access the external Auto Attendant
system.
Set Telco features for the CAA DN
1. Press – until you reach the top level, then press
' until the prompt displays Terminals&Sets.
2. Press ≠. The prompt displays: Show set:
3. Enter the DN for the Auto Attendant system.
4. Press ≠. The prompt displays Line access.
5. Press ' until the prompt displays Telco
features.
6. Press ≠. The prompt displays Feature Assign.
7. Press ≠. The prompt displays Show line.
8. Enter the line number that connects to the system for the
central voice mail system.
9. Press ≠. The prompt displays Caller ID Set.
10. Press ' until the prompt displays Extl VMsg
set.
11. Press CHANGE to select Y (yes).
Set Telco features for the target line
1. Press – until you reach the top level, then press
' until the prompt displays Lines.
2. Press ≠. The prompt displays: Show line:
3. Enter the target line number for the voice mail system.
4. Press ≠. The prompt displays: Trunk/line
data:
P0992638 03
Private networking using PRI SL-1 / 153
Modular ICS 6.0 Installer Guide