Gain - Nortel Modular ICS 6.0 Installer's Manual

Nortel modular ics 6.0 digital system package

Hide thumbs Also See for Modular ICS 6.0:

Table of Contents

Gain

Select the appropriate gain level for the line.

Press CHANGE to select either: Normal or High.

The default value Normal induces zero loss. Use it when the

E&M trunks are connected to facilities that present 0 dBm at

the interface, for both the transmit and receive paths.

Normal gain level (0dBm)

The value High induces 7 dB of loss in the receive path and

16 dB of loss in the transmit path. Use it when the E&M trunks

are connected to facilities that present +7 dBm in the receive

path, and -16 dBm in the transmit path, at the interface.

High gain levels

be set for lines on E&M Trunk Cartridges.

Control over the gain on transmission levels can only

Installer password required

Facility or Norstar

Facility or Norstar

Modular ICS 6.0 Installer Guide