Brake Light Switch; Headlight Aim - Honda Transalp XL700V Manual

MAINTENANCE

BRAKE LIGHT SWITCH

• The brake light switch on the front brake master
cylinder cannot be adjusted. If the front brake
light switch actuation and brake engagement are
not synchronized, either replace the switch unit
or the malfunctioning parts of the system.
• Make the rear brake light switch adjustments
after the brake pedal height adjustment.
Check that the brake light comes on just prior to the
brake actually being engaged.
If the light fails to come on, adjust the switch so that
the light comes on at the proper time.
Hold the switch body and turn the adjusting nut as
Do not turn the
required.
switch body while
turning the
Recheck the brake light switch operation.
adjusting nut.

HEADLIGHT AIM

Support the motorcycle in an upright position.
Adjust the headlight beam vertically by turning the
Adjust the headlight
vertical beam adjuster.
beam as specified
by local laws and
Adjust the headlight beam horizontally by turning
regulations.
the horizontal beam adjuster.
3-26
ADJUSTING NUT
VERTICAL BEAM ADJUSTER
HORIZONTAL BEAM ADJUSTER