Clutch Installation - Honda Transalp XL700V Manual

CLUTCH/GEARSHIFT LINKAGE
Hold the stopper arm with a screwdriver, and
tighten the bolt to the specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Apply engine oil to a new O-ring and install it to the
oil feed pipe.
Install the oil feed pipe.
Clean and apply locking agent to the bolt threads
(page 1-18).
Install and tighten the bolt to the specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Install the gearshift pedal to the spindle, aligning
with the punch marks.
Tighten the pinch bolt to the specified torque.
TORQUE: 17.6 N·m (1.8 kgf·m, 13 lbf·ft)
Install the clutch (page 10-16).

CLUTCH INSTALLATION

Apply molybdenum disulfide oil solution to the
clutch outer guide outer surface.
Install the clutch outer guide to the mainshaft.
10-16
OIL FEED PIPE
O-RING
PINCH BOLT
Align
CLUTCH OUTER GUIDE
STOPPER ARM
BOLT
BOLT
GEARSHIFT PEDAL