CLUTCH/GEARSHIFT LINKAGE
Apply engine oil to the clutch lifter piece sliding sur-
face and install it to the clutch lifter bearing.
Tighten the oil pump driven sprocket bolt if it is
removed.
TORQUE: 15 N·m (1.5 kgf·m, 11 lbf·ft)
Install the right crankcase cover (page 10-20).
RIGHT CRANKCASE COVER
INSTALLATION
ASSEMBLY
Apply engine oil to the needle bearings.
Apply grease to the oil seal lips.
Install the return spring, washer and clutch lifter
arm.
10-20
CLUTCH LIFTER PIECE
DRIVEN SPROCKET BOLT
BEARINGS
WASHER
BEARING
OIL SEAL
LIFTER ARM
RETURN SPRING