Abs Indicator Circuit; Troubleshooting - Honda Transalp XL700V Manual

ABS INDICATOR CIRCUIT

TROUBLESHOOTING

ABS INDICATOR DOES NOT COME ON (when the
ignition switch turned ON)
1. Combination
Inspection
Check the combination meter power and ground
lines (page 20-9).
Are the wires normal?
NO
YES
2. Indicator Operation Inspection
Disconnect the ABS modulator 26P connector.
Turn the ignition switch ON and check the ABS
indicator.
Does the indicator come on?
YES
NO
3. Indicator Signal Line Short Circuit Inspection
Turn the ignition switch OFF.
Disconnect the combination meter 20P connec-
tor.
Check for continuity between the ABS modulator
26P connector of the wire harness side and
ground.
TOOL:
Test probe
Connection: Red/black – Ground
Is there continuity?
YES
NO
Meter Power/ground
– Open circuit in related wires
– GO TO STEP 2.
– Faulty ABS modulator
– GO TO STEP 3.
07ZAJ-RDJA110
– Short circuit in Red/black wire between
the combination meter and ABS modu-
lator
– Faulty combination meter
ANTI-LOCK BRAKE SYSTEM (ABS)
Line
ABS MODULATOR 26P CONNECTOR
R/Bl
ABS MODULATOR 26P CONNECTOR
(Wire side/female terminal)
16-11