Regulator/Rectifier - Honda Transalp XL700V Manual

BATTERY/CHARGING SYSTEM

REGULATOR/RECTIFIER

WIRE HARNESS INSPECTION
BATTERY CHARGING LINE
Remove the left side cover (page 2-4).
With the ignition switch turned OFF, disconnect the
regulator/rectifier 2P (Natural) connector.
Measure the voltage between the Red wire terminal
(+) of the wire harness side 2P (Natural) connector
and ground (–).
There should be battery voltage at all times.
GROUND LINE
Check for continuity between the Green wire termi-
nal of the wire harness side 2P (Natural) connector
and ground (–).
There should be continuity at all times.
If all components of the charging system are normal
and there are no loose connection at the regulator/
rectifier connector, replace the regulator/rectifier.
REMOVAL/INSTALLATION
Remove the left side cover (page 2-4).
With the ignition switch turned OFF, disconnect the
regulator/rectifier 2P (Natural) connector and alter-
nator 3P (Natural) connector.
17-8
2P (NATURAL) CONNECTOR
2P (NATURAL) CONNECTOR
3P (NATURAL) CONNECTOR
2P (NATURAL) CONNECTOR