Cooling Fan - Honda Transalp XL700V Manual

INSTALLATION
Install the radiators and bolts.
Tighten the bolts securely.
Connect the fan motor 2P (Black) connector.
Connect the siphon hose and joint hose.
Connect the water hoses and tighten the band
screws specified range (page 6-10).
Install the right and left air guard (page 2-10).
Lowering the fuel tank (page 3-5).
Fill and bleed the cooling system (page 6-7).

COOLING FAN

REMOVAL
Lift and support the fuel tank (page 3-5).
Remove the right air guard (page 2-10).
Disconnect the fan motor 2P (Black) connector.
Remove the bolts and fan motor assembly.
DISASSEMBLY
Remove the nut and cooling fan.
COOLING SYSTEM
RADIATORS
2P (BLACK) CONNECTOR
SIPHON HOSE
WATER HOSES
2P (BLACK) CONNECTOR
NUT
BOLTS
JOINT HOSE
FAN MOTOR
ASSEMBLY
BOLTS
COOLING FAN
6-11