Wire Harness Cover; Air Guide - Honda Transalp XL700V Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
DISASSEMBLY/ASSEMBLY
Remove the screws, inner cowl and lid.
Assembly is in the reverse order of disassembly.

WIRE HARNESS COVER

REMOVAL/INSTALLATION
Remove the front side cowl (page 2-9).
Remove the trim clips.
Release the boss on the wire harness cover from the
grommet and remove the wire harness cover.
Installation is in the reverse order of removal.

AIR GUIDE

REMOVAL/INSTALLATION
Remove the wire harness cover (page 2-10).
Right side:
Remove the bolts and right air guide.
Remove the front side cowl (page 2-9).
Left side:
Remove the bolt and release the hook from the
water hose.
Remove the left air guide.
Installation is in the reverse order of removal.
2-10
INNER COWL
LID
WIRE HARNESS COVER
GROMMET
BOSS
TRIM CLIP
RIGHT SIDE:
AIR GUIDE
BOLTS
LEFT SIDE:
WATER HOSE
SCREWS
BOLT
AIR GUIDE
HOOK