RIGHT CRANKCASE COVER REMOVAL
REMOVAL
Drain the engine oil (page 3-13).
Remove the exhaust system (page 2-14).
Remove the bolts in a crisscross pattern in several
steps.
Remove the clutch cable holder and disconnect the
clutch cable end from the clutch lifter arm.
Remove the right crankcase cover.
Remove the dowel pins and clean off the sealant
Be careful not to
from the mating surface.
damage the mating
surface.
DISASSEMBLY
Remove the clutch lifter rod while turning the lifter
arm clockwise.
Remove the clutch lifter arm, washer and return
spring.
CLUTCH/GEARSHIFT LINKAGE
CLUTCH CABLE
BOLTS
RIGHT CRANKCASE COVER
DOWEL PINS
LIFTER ROD
WASHER
HOLDER
LIFTER ARM
LIFTER ARM
RETURN SPRING
10-5