ENGINE REMOVAL/INSTALLATION
Connect the horn connectors.
Install the neutral switch/EOP switch wire and alter-
nator wire to the wire guide.
Route the neutral switch/EOP switch and alternator
wires, and connect the neutral switch/EOP switch 2P
(Natural) connector.
Install and tighten the reserve tank mounting bolt.
Install the alternator wire to the harness clamp and
wire band.
Connect the alternator 3P (Natural) connector.
7-12
HORN CONNECTORS
WIRE GUIDE
BOLT
2P (NATURAL) CONNECTOR
CLAMP
3P (NATURAL) CONNECTOR
WIRE BAND
WIRES
WIRES