Honda Transalp XL700V Manual page 194

Loosen the air cleaner housing connecting tube
band screws.
Disconnect the crankcase breather drain hose and
PAIR air suction hose from the air cleaner housing.
Remove the PAIR control solenoid valve and valve
cover from the air cleaner housing.
Disconnect the crankcase breather hose from air
cleaner housing.
Disconnect the IAT sensor 2P (Gray) connector.
Remove the air cleaner housing.
• Seal the throttle body intake ports with tape or a
clean cloth to keep dirt and debris from entering
the intake ports after the air cleaner housing has
been removed. If debris is allowed to enter the
ports the engine may be damaged.
FUEL SYSTEM (PGM-FI)
SCREWS
DRAIN HOSE
SOLENOID VALVE/VALVE COVER
BREATHER HOSE
2P (GRAY) CONNECTOR
AIR CLEANER HOUSING
AIR SUCTION HOSE
5-63