Honda Transalp XL700V Manual page 529

ELECTRIC STARTER
STARTER MOTOR
REMOVAL
• With the ignition switch OFF, disconnect the bat-
tery negative (–) cable before servicing the
starter motor.
Remove the rear exhaust pipe protector A and
exhaust pipe protector B (page 2-15).
Remove the rubber cap and terminal nut.
Disconnect the starter motor cable.
Remove the bolts and ground cable.
Remove the starter motor from the crankcase.
Remove the O-ring from the starter motor.
19-6
RUBBER CAP
STARTER MOTOR CABLE
GROUND CABLE
STARTER MOTOR
TERMINAL NUT
BOLTS
O-RING