Honda Transalp XL700V Manual page 388

Install the fork tube bushing, being careful not to
Do not open the
damage the coating of the bushing if it has been
bushing slit more
removed.
than necessary.
Remove the burrs from the bushing mating surface,
being careful not to peel off the coating.
Apply fork fluid to the new oil seal lips.
Install the oil seal
Install the slider bushing, back-up ring and new oil
with its marked
seal onto the fork tube.
side facing up.
Install the rebound spring to the fork piston, then
install them into the fork tube.
Install the oil lock piece to the fork piston end.
Install the fork tube assembly into the fork slider.
Hold the fork slider in a vise with soft jaws.
Apply a locking agent to the fork center bolt threads.
Install the socket bolt with a new sealing washer.
FRONT WHEEL/SUSPENSION/STEERING
TUBE BUSHING
SLIDER BUSHING
FORK PISTON
FORK SLIDER
OIL LOCK PIECE
CENTER BOLT
OIL SEAL
BACK-UP RING
REBOUND SPRING
FORK PISTON
SEALING WASHER
13-27