INSTALLATION
Install the side collars.
Place the rear wheel into the swingarm.
Be careful not to
damage the VS
Install the drive chain over the driven sprocket.
sensor when
Apply a thin coat of grease to the rear axle surface.
installing the wheel.
Install the adjusting plate and rear axle from the left
side.
Install the adjusting plate and rear axle nut.
Adjust the drive chain slack (page 3-17).
SHOCK ABSORBER
REMOVAL
Remove the side covers (page 2-4).
Support the motorcycle using a hoist or equivalent,
and raise the rear wheel off the ground.
Remove the screws and mud guard.
REAR WHEEL/SUSPENSION
COLLAR
SETTING PLATE
MUD GUARD
AXLE
DRIVE CHAIN
AXLE NUT
SETTING PLATE
SCREWS
14-13