Press the new bearings until the metal installer
flange fully seat.
Make sure the bearing mating line aligns with the
index mark on the crankcase.
Check the oil clearance (page 12-14).
• After selecting new bearings, recheck the clear-
ance. Incorrect clearance can cause severe
engine damage.
Install the crankshaft (page 12-11).
TRANSMISSION
REMOVAL
Separate the crankcase (page 12-7).
Remove the fork shaft from the shift forks.
Remove the shift forks and shift drum.
CRANKCASE/CRANKSHAFT/TRANSMISSION
BEARING
SHIFT DRUM
SHIFT FORKS
INSTALLER SET
INDEX MARK
FORK SHAFT
12-19