Brake/Tail Light - Honda Transalp XL700V Manual

LIGHTS/METERS/SWITCHES
REAR
Remove the fender cover (page 2-6).
Remove the nut and turn signal light.
Installation is in the reverse order of removal.

BRAKE/TAIL LIGHT

BULB REPLACEMENT
Remove the seat (page 2-4).
Turn the bulb socket counterclockwise, then remove
it from the brake/tail light unit.
While pushing the bulb in, turn it counterclockwise
to remove it from the bulb socket, and replace it
with a new one.
Installation is in the reverse order of removal.
REMOVAL/INSTALLATION
Remove the rear fender A (page 2-6).
Disconnect the brake/tail light 3P (Natural) connec-
tor.
Remove the bolts, collars, grommets and brake/tail
light unit.
Installation is in the reverse order of removal.
20-8
TURN SIGNAL LIGHT
NUT
BULB
BOLTS/COLLARS/GROMMETS
BRAKE/TAIL LIGHT UNIT
3P (NATURAL) CONNECTOR
BULB SOCKET