Install the cooling fan onto the motor shaft, aligning
the flat surfaces.
Apply locking agent to the cooling fan nut threads.
Install and tighten the nut to the specified torque.
TORQUE: 2.7 N·m (0.3 kgf·m, 2.0 lbf·ft)
INSTALLATION
Install the fan motor assembly on the radiator and
tighten the bolts to the specified torque.
TORQUE: 8.4 N·m (0.9 kgf·m, 6.2 lbf·ft)
Connect the fan motor 2P (Black) connector.
Install the right air guard (page 2-10).
Lowering the fuel tank (page 3-5).
FAN MOTOR RELAY
INSPECTION
Remove the seat (page 2-4).
Open the fuse box and remove the fan motor relay.
COOLING SYSTEM
NUT
2P (BLACK) CONNECTOR
FUSE BOX
COOLING FAN
Align
FAN MOTOR
ASSEMBLY
BOLTS
FAN MOTOR RELAY
6-13