Honda Transalp XL700V Manual page 460

Push the dust and piston seals in and lift them out.
Be careful not to
damage the piston
Clean the seal grooves, caliper cylinders and pis-
sliding surface.
tons with clean brake fluid.
INSPECTION
Check the caliper cylinders for scoring, scratches or
damage.
Measure the caliper cylinder I.D.
SERVICE LIMITS:
Right caliper: Front:
Left caliper:
Check the caliper pistons for scoring, scratches or
damage.
Measure the caliper piston O.D.
SERVICE LIMITS:
Right caliper: Front:
Left caliper:
22.712 mm (0.8942 in)
Center: 22.712 mm (0.8942 in)
Rear: 22.712 mm (0.8942 in)
Front: 25.460 mm (1.0024 in)
Center: 22.712 mm (0.8942 in)
Rear: 25.460 mm (1.0024 in)
22.560 mm (0.8882 in)
Center: 22.560 mm (0.8882 in)
Rear: 22.560 mm (0.8882 in)
Front: 25.310 mm (0.9965 in)
Center: 22.560 mm (0.8882 in)
Rear: 25.310 mm (0.9965 in)
HYDRAULIC BRAKE
PISTON SEAL
DUST SEAL
15-31