CRANKCASE/CRANKSHAFT/TRANSMISSION
LEFT CRANKCASE BEARINGS
Remove the mainshaft bearings using the special
tools.
TOOLS:
Bearing remover, 20 mm
Remover handle
Remover weight
Drive the countershaft bearing out of the left crank-
case.
Drive new bearings into the left crankcase with the
marked side facing up until they are fully seated.
TOOLS:
Mainshaft bearing:
Driver
Attachment, 42 x 47 mm
Pilot, 20 mm
Countershaft bearing:
Driver
Attachment, 52 x 55 mm
Pilot, 25 mm
Apply grease to a new countershaft oil seal lip.
Install the oil seal
with its marked
Install the countershaft oil seal.
side facing out.
RIGHT CRANKCASE BEARINGS
Drive the bearings out of the right crankcase.
12-28
COUNTERSHAFT BEARING
07936-3710600
07936-3710100
07741-0010201
07749-0010000
07746-0010300
07746-0040500
07749-0010000
07746-0010400
07746-0040600
BEARING
MAINSHAFT BEARING
COUNTERSHAFT BEARING
MAINSHAFT BEARING
BEARING REMOVER
WEIGHT
HANDLE
DRIVER
ATTACHMENT
OIL SEAL