Gearshift Linkage - Honda Transalp XL700V Manual

CLUTCH/GEARSHIFT LINKAGE
Install the CKP sensor, wire grommets and tighten
the bolts.
Install the clutch (page 10-16).

GEARSHIFT LINKAGE

REMOVAL
Remove the clutch (page 10-6).
Remove the pinch bolt and gearshift pedal from the
spindle.
Clean the gearshift spindle.
Remove the bolt, oil feed pipe and O-ring.
Remove the following:
– Bolt
– Washer
– Stopper arm
– Collar
– Return spring
10-14
CKP SENSOR
GEARSHIFT PEDAL
BOLT
OIL FEED PIPE/O-RING
STOPPER ARM
BOLT/WASHER/COLLAR
BOLTS
GROMMETS
PINCH BOLT
RETURN SPRING