Honda Transalp XL700V Manual page 201

FUEL SYSTEM (PGM-FI)
Disconnect the fuel hose quick connector (page 5-
54).
Remove the bolts and fuel feed hose and injector
from the throttle body.
Remove the injector from the fuel feed hose.
Remove the O-ring and seal ring.
INSTALLATION
Coat a new O-ring and new seal ring with engine oil.
Replace the O-ring
and seal ring with
Install a new O-ring and new seal ring on the injec-
new ones as a set.
tor, being careful not to damage.
Install the injector to the fuel feed hose.
Set the injector installation angle as shown.
5-70
FUEL FEED HOSE
QUICK CONNECTOR
FUEL FEED HOSE
INJECTOR
SEAL RING
FUEL FEED HOSE
INJECTOR
SEAL RING
BOLTS
O-RING
O-RING
11°
INJECTOR