Starter Clutch Inspection - Honda Transalp XL700V Manual

ALTERNATOR/STARTER CLUTCH
Remove the torx bolts while holding the flywheel
using the special tool.
TOOL:
Flywheel holder
Remove the clutch outer and one-way clutch from
the flywheel.

STARTER CLUTCH INSPECTION

NEEDLE BEARING
Check the needle bearing for abnormal wear or
damage.
ONE-WAY CLUTCH/CLUTCH OUTER
Check the one-way clutch sprag for abnormal wear,
damage or irregular movement.
• Do not remove the one-way clutch from the
clutch outer, unless it is necessary to replace
with a new one.
• If the spring is removed from the one-way clutch
groove, replace the one-way clutch assembly
with a new one.
Check the clutch outer for wear or damage.
Measure the clutch outer I.D.
SERVICE LIMIT: 74.46 mm (2.931 in)
11-8
TORX BOLTS
07725-0040001 or
equivalent commer-
cially available
FLYWHEEL
NEEDLE BEARING
CLUTCH OUTER
CLUTCH OUTER
ONE-WAY CLUTCH
ONE-WAY CLUTCH