Buc Parameters (L-Band Device - Comtech EF Data CDM-740 Installation And Operation Manual

CDM-740 Advanced Satellite Modem
Remote Control
A.5.7

BUC Parameters (L-Band Device)

Command
Parameter Number of
(Instruction
Type Arguments
& Qualifier)
BUC BCH= 4 bytes
Current
High Limit
BUC BCL= 4 bytes
Current
Low Limit
BUC N/A 4 bytes
DC
Current
BUC N/A 4 bytes
Voltage
BUC BFR= 1 byte
10 MHz
Reference
BUC BPS= 1 byte, value of 0
Power Supply or 1
enable
Description of Arguments
Command or Query.
Sets or returns the BUC Current High Limit in the form xxxx, where:
xxxx = a value between 0 and 4000mA, in 100mA increments
Command or Query.
Sets or returns the BUC Current Low Limit in the form xxxx, where:
xxxx = a value between 0 and 4000mA, in 100mA increments.
Query only.
Returns the value of the BUC DC current in the form xxxx, where:
xxxx = a value, in mA, between 0 and 9999.
If not available, response is 0000.
Query only.
Returns the value of the BUC Voltage in the form xx.x, where:
xx.x = a value, in volts, between 0 and 64.0
Command or Query.
BUC 10 MHz Reference control, where:
0=Off
1=On
Command or Query.
BUC Power Supply control, where:
0=Disable the BUC DC Power Supply
1=Enable the BUC DC Power Supply
A–23
Revision 0
MN-CDM740
Query
Response to
(Instruction & Response to Query
Command
Qualifier)
BCH= BCH? BCH=xxxx
BCH? (see Description of
BCH* Arguments)
BCH#
BCL= BCL? BCL=xxxx
BCL? (see Description of
BCL* Arguments)
BCL#
N/A BDC? BDC=xxxx
(see Description of
Arguments)
N/A BDV? BDV=xx.x
(see Description of
Arguments)
BFR= BFR? BFR=x
BFR? (see Description of
BFR* Arguments)
BFR#
BPS= BPS? BPS=x
BPS? (see Description of
BPS* Arguments)
BPS#