Select: Odu Menu Branch (Summary Only); Select: Fast Menu Branch; Fast: Options; Fast: Options  View Options - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Front Panel Operation

6.2.7 SELECT: ODU Menu Branch (Summary Only)

See Chapter 10. CDM-625A ODU (TRANSCEIVER, BUC, LNB) OPERATION for
complete details about this product-specific menu branch.
ODU: BUC:PwrSupply+Ref
Depending on 70/140 MHz or L-Band operation: Use this menu branch to monitor and control a
standalone or redundant Comtech EF Data RF Transceiver (CSAT-5060 or KST-2000A/B) or LPOD
BUC, when connected.

6.2.8 SELECT: FAST Menu Branch

The display example as shown here depicts a unit shipped with the Two- channel
Audio Drop hardware option installed. If this hardware is not included, 'Audio' does
not appear on the bottom line.
FAST:
Baseboard S/N 123456789
FAST (Fully Accessible System Topology) allows you to enable new options in the modem. Use
the ◄ ► arrow keys to select Options, Demo-Mode, or CnC. Press ENTER.
6.2.8.1

FAST: Options

FAST options:
Set Register1
You can access the FAST options via three separate internal EEPROM registers. Each register
requires its own FAST access code. Use the
Register1, or Set Register2. Press ENTER.
6.2.8.1.1 FAST: Options  View Options
FAST: View options: 01
Use the arrow keys to scroll through the available options. The modem identifies each
▲▼
selected FAST option as "installed" or "not installed".
LNB:PwrSupply+Ref
Options
View Options
Set Register2
Base 5 Mbps data rate installed
FSK-control ()
Demo-Mode CnC
HW Rev1.X Audio
◄ ► arrow keys to select View Options, Set
6–100
MN-CDM625A
Revision 4
()
()