Select: Fast Menus; Fast: Options; Fast: Options  View Options - Comtech EF Data CDM-625 Installation And Operation Manual

Advanced satellite modem (18 kbps – 25 mbps)

Hide thumbs Also See for CDM-625:

Table of Contents

CDM-625 Advanced Satellite Modem

Front Panel Operation

Depending on 70/140 MHz or L-Band operation: Use to monitor and control a standalone or

redundant Comtech EF Data RF Transceiver (CSAT-5060 or KST-2000A/B) or LPOD BUC if

5.2.8 SELECT: FAST Menus

The d isplay example a s s hown h ere d epicts a unit s hipped w ith th e T wo-

channel A udio D rop h ardware o ption i nstalled. I f th is h ardware i s not

included, 'Audio' does not appear on the bottom line.

Baseboard S/N 123456789

FAST (Fully Accessible System Topology) allows you to enable new options in the modem. Use

arrow keys to select Options, Demo-Mode, or CnC, and then press ENTER.

FAST options:

You can access the FAST options via three separate internal EEPROM registers. Each register

requires its own FAST access code. Use the

Registers (to continue via the correct register menu), and then press ENTER.

5.2.8.1.1 FAST: Options  View Options

FAST: View options: 01

arrow keys to scroll through the available options. The modem identifies each

selected FAST option as "installed" or "not installed".

You must contact a Comtech EF Data sales representative, during normal business hours or via

e-mail to sales@comtechefdata.com, to purchase the FAST Access Code for the desired option.

Available options include:

► Data Rate when configured for TPC/LDPC

► Data Rate when configured for CnC (DoubleTalk Carrier-in-Carrier)

► Data Rate when configured for VersaFEC

View Options

Set Registers

Base 5 Mbps data rate installed

HW Rev1.X Audio

arrow keys to select View Options or Set